ITALPUMP

ITP Series

Medium to high capacity

Applications:

• Heavy oil and light oil.
• One pipe and two pipe systems.
• Drilling for heating cartridge.
• Capacity from 350 l/h to 1380 l/h

AG Series

Medium to high capacity

Applications:

• Light oil.
• One pipe or two pipe systems.
• Self priming.
• Hub diameter 32mm or 54mm with flange.
• Capacity from 50 l/h to 280 l/h.

AN Series

Medium to high capacity

Applications:

• Heavy oil and light oil.
• One pipe or two pipe systems.
• Self priming.
• Hub diameter 32mm or 54mm with flange.
• Capacity from 65 l/h to 210 l/h.

GBE/KBE Series

Low capacity pumps

Applications:

• Light oil (GBE) or kerosene (KBE)
• One pipe or two pipe system.
• Single stage.
• Cartridge filter.
• Solenoid valve normally closed with cut off function.
• Capacity from 25 l/h to 83 l/h.

GBE-LE Series

Low capacity pumps

Applications:

• Light oil.
• Two pipe system.
• Single stage.
• Cartridge filter.
• Solenoid valve normally closed with cut off function.
• Capacity from 20 l/h to 75 l/h.
• Low emission on the burner start and stop.

Series PT

Solenoid Valves

Applications:

• Light Oil.
• Normally closed.
• Oil cut off and seal device.
• Available with plug (F84) or with cable (M81).
• Connections:
  • • • 1/8″ FF
      • 1/8 MF
      • 1/8″ Male – 1/4″ Female

ITV Series

Industrial series

Applications:

• Low pressure with 5-10 bar max. differential pressure.
• Max inlet pressure 2 bar.
• Used for fuel and lubricant without abrasive contents.
• High volumetric efficiency and hydraulically balanced.
• Very low noise (52-53 dBA @ 2800rpm).

ITR Series

Industrial series

Applications:

• Low pressure.
• Fuels or lubricants (non corrosive).
• Maximum fluid temperature 250 °C.
• Pressure adjustment by screw 1-5 bar.
• Increased pressure on request.

ITR Series

Industrial series

Applications:

• Light and heavy oil.
• Pressure range 5-30 bar.
• Capacity up to 6000 l/h.

ITG Series

Butterfly gas valves

Applications:

• Suitable for:
  • • Hot air
    • Natural gas
    • LPG
    • Towns gas and other non aggressive fuels
• Low leakage rate and pressure loss.
• Can be mounted to any actuator.
• Low maintenance.
• Modulating ratio 1:10