Current Sensors

ECS10

A truly new and unique development that allows fan motor current consumption to be monitored to give reliable and safe indication of the fan’s performance for BS6173 interlock applications. Unlike other current sensors, the ECS10 can easily detect ventilation defects caused by broken belts, reversed motors, progressive filter blockage and the like. Additionally the ECS10 is tested at every start up using the ‘Safe Start Check’ method, an internationally accepted fail safe procedure. The ECS10 is a fully indicating instrument in so far as the current being monitored is displayed on a large and clear LCD screen.

  • The only ‘intelligent’ current sensor available.
  • CE marked & tested to comply with the low voltage directive & EMC emissions
  • Protected to IP65 allowing normal catering hygiene operations.
  • 24 month manufacturer’s warranty.

ECS10/e

The ECS10/e is a non indicating version of our highly regarded flagship current monitoring sensor, the ECS10 above. This model offers a lower cost option as it does not have a built in LCD ammeter or an adjustable differential. The ECS10/e indicates when the correct current has been detected by way of a green LED, which changes to red if insufficient current is drawn by the fan motors for safe operation.

Ordering is simplified as the ECS10/e has three current ranges, 0.1 – 1 amp 1-10 amps & 10-20 amps thereby catering for most installations. The appropriate range is set within the base of the control, which is modular, allowing for a convenient plug in replacement of the unit.

  • CE marked & tested to comply with the low voltage directive & EMC emissions
  • Protected to IP65 allowing normal catering hygiene operations.
  • 24 month manufacturer’s warranty.